AR-coated windows

IBS-coated windows that maximize transmission while minimizing reflection losses and backscatter – a small component with an outsized role in protecting laser systems and keeping them efficient and stable. High transmittance, excellent spectral performance and high LIDT come standard, with AR coatings that cut ghost images from back reflections and hold up to temperature swings, humidity and long-term optical fatigue.

Read how our IBS coating process works

Capabilities

Coating technology Ion Beam Sputtering (IBS)
Spectral range 193 – 5000 nm
Transmittance > 99.9%
Size 3 – 500 mm
TWD Up to λ/20
Surface quality Up to 10-5 S-D over CA (MIL-PRF-13830B)
GDD <20 fs2
LIDT > 0.18 J/cm2, 515 nm, 190 fs, 300 kHz
> 0.5 J/cm2, 1030 nm, 500 fs, 10 kHz
>0.39 J/cm2, 343 nm, 1 ps, 1000 Hz

Company-wide capability spans 200–2200 nm

Measured performance

Reflectance and GDD are measured in our own metrology lab in Vilnius. LIDT and absorption are measured independently at Lidaris, an accredited laser-damage testing lab. Every graph is labeled as measured or theoretical. Theoretical curves are calculated from the coating design and show the expected performance. You can download the raw data below.

Filters

Design example:

Graph:

Absorption: longitudinal scan

AR<0.1% @ 1030 nm, AOI=0° (AR548)

AR Coating @ 1030 nm — Absorption: longitudinal scan

Absorption: time scan (S1)

AR<0.1% @ 1030 nm, AOI=0° (AR548)

AR Coating @ 1030 nm — Absorption: time scan (S1)

Absorption: transverse scan (S1)

AR<0.1% @ 1030 nm, AOI=0° (AR548)

AR Coating @ 1030 nm — Absorption: transverse scan (S1)

In-stock at OPTOSHOP

1-3 days delivery from stock, 400+ products available

PP-UVFS-25.4-6.35-AR548-AR548

WINDOWS

PP-UVFS-25.4-6.35-AR548-AR548

AR coating R < 0.1%
Wavelength 1030 nm
Diameter Ø 25.4 mm
PP-UVFS-25.4-6.35-AR784-AR784

WINDOWS

PP-UVFS-25.4-6.35-AR784-AR784

AR coating R < 0.1%
Wavelength 515 nm
Diameter Ø 25.4 mm
PP-UVFS-25.4-6.35-AR909-AR909

WINDOWS

PP-UVFS-25.4-6.35-AR909-AR909

AR coating R < 0.1%
Wavelength 1064 nm
Diameter Ø 25.4 mm
PP-UVFS-25.4-6.35-AR43-AR43

WINDOWS

PP-UVFS-25.4-6.35-AR43-AR43

AR coating R < 0.1%
Wavelength 355 nm
Diameter Ø 25.4 mm
PP-Al2O3-60.0-5.0-AR1004-AR1004

WINDOWS

PP-Al2O3-60.0-5.0-AR1004-AR1004

AR coating R ≤ 0.2%
Wavelength 308 nm
Diameter Ø 60.0 mm
PP-UVFS-25.4-3.0-AR772-AR772

WINDOWS

PP-UVFS-25.4-3.0-AR772-AR772

AR coating R < 0.25%
Wavelength 266 nm
Diameter Ø 25.4 mm
PP-UVFS-25.4-3.0-AR875-AR875

WINDOWS

PP-UVFS-25.4-3.0-AR875-AR875

AR coating R < 0.2%
Wavelength 257 nm
Diameter Ø 25.4 mm

Used in published research

Available lenses and substrates

Save

6 weeks

of lead time

Save

3 times

end-product cost

Lenses

OPTOMAN has a number of plano-concave and plano-convex lenses in stock, ready to be coated. Choosing the in-stock substrate option allows, on average, saving 6 weeks of lead time and reducing end-product cost 3 times.

Plano substrates

OPTOMAN has a number of 1/2”, 1”, 2” and 3” plano substrates in stock, ready to be coated. Choosing the in-stock substrate option allows, on average, saving 6 weeks of lead time and reducing end-product cost 3 times.

Let’s get your quotation started.

Our AI assistant will ask the same technical questions our engineers would normally ask by email, so we can understand your requirements from the start and prepare your quotation faster.

Prefer to fill it in yourself?
Send us your requirements directly and our team will get back to you.
  1. 1 Specifications
  2. 2 Laser Parameters
  3. 3 Contact

    Dimensions
    Incorect value
    Incorect value
    Coating type
    Incorect value
    Incorect value
    Incorect value

    Incorect value

    Incorect value

    Incorect value

    Incorect value

    Incorect value

    Incorect value

    Incorect value
    Incorect value

    Incorect value
    Incorect value
    Incorect value
    Incorect value
    0/2500
    Incorect value

    I agree to the Terms of Use and Privacy Policy 

    Thank you
    for your request

    We will contact you as soon as possible

    OPTOMAN

    FAQ

    How can IBS-coated thin anti-reflective windows benefit my Business? 

    IBS-coated anti-reflective (AR) windows let the laser beam pass through with minimal reflection losses in high-power laser applications from UV to Mid-IR. Coatings can be optimized for a single wavelength, several wavelengths, or a broad spectral range, with transmittance over 99.9% and low GDD (<20 fs²) for ultrafast laser systems. Low absorption, low surface roughness and transmitted wavefront distortion (TWD) of up to <λ/20 keep beam quality high.

    Ion-Beam Sputtering (IBS) gives OPTOMAN AR coatings high Laser-Induced Damage Thresholds (LIDT) and high batch-to-batch consistency, so they perform reliably even in challenging UV laser applications. The enhanced lifetime of these windows means fewer replacements and less downtime, which lowers the Total Cost of Ownership (TCO).

    At OPTOMAN, our expert coating engineers fine-tune each anti-reflective coating for your specific needs, giving you excellent spectral performance and long-lasting solutions for the most demanding laser systems.

    How can I be sure that these laser optics will fit my Business needs?

    OPTOMAN digs deep into each application, providing highly customized and application-optimized solutions that will fit your business needs.

    Together, we will be able to set the priorities that are most important for your application and needs, whether it is reaching fundamental limitations, proving the concept, or making a well-balanced industrial high runner. We keep an open discussion about the main price drivers and help customers optimize BOM costs while maintaining the highest quality level.

    Is it possible to test the optics and how scalable is the production?

    Yes. Based on the customer’s presented business case, OPTOMAN, with its R&D-driven attitude and collaborative approach, can design, develop, and manufacture products for testing purposes and present a plan for serial production. Different-size IBS coating chambers are very handy in this case because small-scale production can be easily transferred to our giant IBS machine – Albert (the atom smasher), where we can coat large optics or 400-500 units of 1“ laser optics in a single coating run, ensuring high uniformity, meaning that all mirrors will work the same making your laser systems highly repeatable and reliable too.

    Moreover, our in-stock optics marketplace, OPTOSHOP, features over 400 different laser optics made with love by OPTOMAN. These optics can be provided for testing directly from stock and delivered in 1-3 business days. After successful tests, OPTOMAN can present the most optimal production plan matching your business needs.

    Does OPTOMAN provide optics or only coating service?

    Both. 80% of total OPTOMAN revenue comes from complete products, while 20% is generated by providing coating services on customer-supplied substrates. OPTOMAN responsibly oversees the supplier network for reliable substrates and, if needed, can offer a completely European supply chain.

    Does OPTOMAN have available substrates ready to coat?

    Yes. OPTOMAN has a number of flat substrates, plano-concave and plano-convex lenses, and spherical mirror substrates in stock, ready to be coated. Choosing the in-stock substrate option allows, on average, saving 6 weeks of lead time and reducing end-product cost 3 times.