Spherical Mirrors

IBS-coated curved mirrors for focusing, collimating or redirecting a beam, with high reflectivity, high LIDT and minimal scattering for high-power systems. We cut concave (negative ROC) for aberration-free focusing and convex (positive ROC) for wider fields of view – beam quality holds up either way, under high power and over the long run.

Read how our IBS coating process works

Capabilities

Coating technology Ion Beam Sputtering (IBS)
Spectral range 193 – 5000 nm
Reflectivity > 99%
Substrate diameter 3 – 500 mm
Surface flatness Up to <λ/20
Surface quality Up to 10-5 S-D over CA (MIL-PRF-13830B)
LIDT > 0.3 J/cm2, 193 nm, 10 ns, 30 Hz
> 38.18 J/cm2, 532 nm, 10 ns, 100 Hz
> 168 J/cm2, 1064 nm, 10 ns, 100 Hz

Company-wide capability spans 200–2200 nm

Measured performance

Reflectance and GDD are measured in our own metrology lab in Vilnius. LIDT and absorption are measured independently at Lidaris, an accredited laser-damage testing lab. Every graph is labeled as measured or theoretical. Theoretical curves are calculated from the coating design and show the expected performance. You can download the raw data below.

Filters

Design example:

Graph:

In-stock at OPTOSHOP

1-3 days delivery from stock, 400+ products available

PCV-R500-UVFS-50.8-ET9.52-UBBHR38

SuperHero power

SPHERICAL MIRRORS

PCV-R500-UVFS-50.8-ET9.52-UBBHR38

Reflectivity > 99.9%
ROC -500 mm
Diameter Ø 50.8 mm
PCV-R2400-UVFS-25.4-ET6.35-ULLM8SHL

SuperHero power

SPHERICAL MIRRORS

PCV-R2400-UVFS-25.4-ET6.35-ULLM8SHL

Reflectivity > 99.9%
ROC -2400 mm
Diameter Ø 25.4 mm
PCV-R800-UVFS-25.4-ET6.35-LLM188

SPHERICAL MIRRORS

PCV-R800-UVFS-25.4-ET6.35-LLM188

Reflectivity > 99.9%
ROC -800 mm
Diameter Ø 25.4 mm
PCV-R1000-IRFS-12.7-ET6.35-LLM178

SPHERICAL MIRRORS

PCV-R1000-IRFS-12.7-ET6.35-LLM178

Reflectivity > 99.8%
ROC -1000 mm
Diameter Ø 12.7 mm

Used in published research

Available lenses and substrates

Save

6 weeks

of lead time

Save

3 times

end-product cost

Lenses

OPTOMAN has a number of plano-concave and plano-convex lenses in stock, ready to be coated. Choosing the in-stock substrate option allows, on average, saving 6 weeks of lead time and reducing end-product cost 3 times.

Plano substrates

OPTOMAN has a number of 1/2”, 1”, 2” and 3” plano substrates in stock, ready to be coated. Choosing the in-stock substrate option allows, on average, saving 6 weeks of lead time and reducing end-product cost 3 times.

Let’s get your quotation started.

Our AI assistant will ask the same technical questions our engineers would normally ask by email, so we can understand your requirements from the start and prepare your quotation faster.

Prefer to fill it in yourself?
Send us your requirements directly and our team will get back to you.
  1. 1 Specifications
  2. 2 Laser Parameters
  3. 3 Contact

    Dimensions
    Incorect value
    Incorect value
    Coating type
    Incorect value
    Incorect value
    Incorect value

    Incorect value

    Incorect value

    Incorect value

    Incorect value

    Incorect value

    Incorect value

    Incorect value
    Incorect value

    Incorect value
    Incorect value
    Incorect value
    Incorect value
    0/2500
    Incorect value

    I agree to the Terms of Use and Privacy Policy 

    Thank you
    for your request

    We will contact you as soon as possible

    OPTOMAN

    FAQ

    How can IBS-coated spherical mirrors benefit my Business? 

    IBS-coated spherical mirrors combine beam focusing or collimation with the high reflectivity of a dielectric laser mirror in a single optical component. This reduces the number of optics in your system and makes it more compact and efficient. OPTOMAN coats both plano-concave and plano-convex UVFS mirror substrates, with a wide range of radii of curvature available from stock in 1/2″, 1″ and 2″ diameters. The substrates meet 20-10 S-D surface quality and surface irregularity of <λ/10 @ 633 nm, which keeps wavefront distortion minimal and beam quality high.

    The same IBS coating designs used for our flat mirrors can be applied to spherical substrates: laser line, broadband, multiwavelength, low GDD and dispersive coatings, from UV to Mid-IR. These coatings have bulk-like density, low absorption and high Laser-Induced Damage Thresholds (LIDT), so they perform reliably in demanding high-power and ultrafast laser systems. Longer operational lifetimes mean fewer replacements, less downtime and a lower Total Cost of Ownership (TCO). Choosing an in-stock spherical substrate also saves, on average, 6 weeks of lead time.

    At OPTOMAN, our expert coating engineers fine-tune each spherical mirror for your specific application, so you get excellent spectral performance and long-lasting solutions for the most demanding laser systems.

    How can I be sure that these mirrors will fit my Business needs?

    OPTOMAN digs deep into each application, providing highly customized and application-optimized solutions that will fit your business needs.

    Together, we will be able to set the priorities that are most important for your application and needs, whether it is reaching fundamental limitations, proving the concept, or making a well-balanced industrial high runner. We keep an open discussion about the main price drivers and help customers optimize BOM costs while maintaining the highest quality level.

    Is it possible to test the optics and how scalable is the production?

    Yes. Based on the customer’s presented business case, OPTOMAN, with its R&D-driven attitude and collaborative approach, can design, develop, and manufacture products for testing purposes and present a plan for serial production. Different-size IBS coating chambers are very handy in this case because small-scale production can be easily transferred to our giant IBS machine – Albert (the atom smasher), where we can coat large optics or 400-500 units of 1“ laser optics in a single coating run, ensuring high uniformity, meaning that all mirrors will work the same making your laser systems highly repeatable and reliable too.

    Moreover, our in-stock optics marketplace, OPTOSHOP, features over 400 different laser optics made with love by OPTOMAN. These optics can be provided for testing directly from stock and delivered in 1-3 business days. After successful tests, OPTOMAN can present the most optimal production plan matching your business needs.

    Does OPTOMAN provide optics or only coating service?

    Both. 80% of total OPTOMAN revenue comes from complete products, while 20% is generated by providing coating services on customer-supplied substrates. OPTOMAN responsibly oversees the supplier network for reliable substrates and, if needed, can offer a completely European supply chain.

    Does OPTOMAN have available substrates ready to coat?

    Yes. OPTOMAN has a number of flat substrates, plano-concave and plano-convex lenses, and spherical mirror substrates in stock, ready to be coated. Choosing the in-stock substrate option allows, on average, saving 6 weeks of lead time and reducing end-product cost 3 times.